Increased switching distance
Innovative ASIC circuit technology
Integrated error display
Minimal mounting clearance thanks to wenglor weproTec
Inductive Sensors with increased switching distances are distinguished by rugged design, easy installation and reliable measured values. The large range makes additional types of sensor superfluous because they can also be used to implement special applications. In addition to error-free operation of several sensors in a very small space, the new generation also provides the possibility of detecting system errors before it's too late thanks to ASIC und wenglor weproTec.
Inductive Data
Switching Distance : 2 mm
Correction Factors Stainless Steel V2A/CuZn/Al : 0,65/0,42/0,32
Mounting : flush
Mounting A/B/C/D in mm : 0/8/6/0
Switching Hysteresis : < 15 %
Electrical Data
Supply Voltage : 10...30 V DC
Current Consumption (Ub = 24 V) : < 6 mA
Switching Frequency : 1500 Hz
Temperature Drift : < 10 %
Temperature Range : -25...80 °C
Switching Output Voltage Drop : < 2,5 V
Switching Output/Switching Current : 100 mA
Residual Current Switching Output : < 100 µA
Short Circuit Protection : yes
Reverse Polarity and Overload Protection : yes
Protection Class : III
Mechanical Data
Housing Material : Stainless Steel
Full Encapsulation : yes
Degree of Protection : IP67
Connection : M8 × 1; 3-pin
Output
PNP NO : yes
Authentic Ensure
Complete Selection
Integrity Service
Worldwide Delivery
One To One Service
Comments